Table of Contents
Advertisement
Controls &
Components
Refer to the following figures and descriptions to
become familiar with the basic controls and com-
ponents of this machine. Understanding these
items and how they work will help you understand
the rest of the manual and minimize your risk of
injury when operating this machine.
Vise
B
A
Figure 1. Vise controls and components.
A. Vise Crank: Adjusts movable vise jaw.
B. Movable Vise Jaw: Holds workpiece against
fixed vise jaw during cutting operation. Angle
is adjustable.
C. Fixed Vise Jaw: Adjusts workpiece angle
relative to blade.
D. Work Stop: Supports repetitive cutting
operations.
Electrical
E
F
Figure 2. Electrical controls and components.
-4-
C
D
G
H
I
E. Auto-Off Tab: Turns machine OFF when
headstock is fully lowered.
F.
ON/OFF Switch w/Disabling Key: Turns
motor ON/OFF and prevents accidental start-
up when disabling key is removed.
G. Blade Speed Display: Displays current
blade speed in Feet Per Minute.
H. Blade Variable-Speed Dial: Adjusts blade
speed from 85–195 FPM.
I.
Circuit Breaker Reset Button: Restores
power to motor when pressed after overload.
Headstock
J
K
N
Figure 3. Headstock controls and components.
J.
Blade Tension Knob: Increases or decreas-
es blade tension.
K. Blade Tracking Mechanism: Adjusts front
blade wheel tilt to move blade to or from
wheel shoulder.
L.
Blade Guide Adjustment Knob: Adjusts
front blade guide that supports blade. Position
guide as close to workpiece as possible to
prevent blade from twisting.
M. Downfeed Stop Bolt: Stops headstock from
lowering farther than completion of cut.
N. Feed Rate Adjustment Handle: Increases
feed rate when turned counterclockwise and
decreases feed rate when turned clockwise.
Model G0926 (Mfd. Since 11/20)
M
L
Advertisement
Table of Contents
