Controls & Components - Grizzly G1023RL Series Owner's Manual

Controls &
Components
To reduce your risk of
serious injury, read this
entire
using machine.
Refer to Figures 1–2 and the following descrip-
tions to become familiar with the basic controls of
this machine.
A. ON/OFF Switch: Starts and stops motor.
B. Switch Disabling Lock: When installed, dis-
ables switch to prevent accidental startup.
A
B
Figure 1. ON/OFF switch with disabling lock.
-4-
manual BEFORE
C. Blade Height Handwheel: Adjusts blade
height from 0"–3".
D. Blade Tilt Handwheel: Adjusts blade angle
from 0°–45°.
E. Blade Height Lock: Locks blade height
when tightened.
Fence Lock Handle: Locks fence when
F.
pushed down, unlocks fence when pulled up.
G. Blade Tilt Lock: Locks blade tilt when
tightened.
C
E
Figure 2. Adjustment controls.
H. Miter Gauge: Supports workpiece during
crosscut or angle cutting operations.
Blade Guard: Covers blade to reduce risk of
I.
operator contact with blade.
J. Spreader: Keeps cut portion of workpiece
from pinching blade to reduce risk of binding
or kickback.
K. Fence: Guides workpiece as it moves into
blade and determines angle of cut.
I
H
Figure 3. Table components.
Model G1023RL Series (Mfd. Since 02/21)
D
F
G
K
J