Performing The Final Wiring - Assa Abloy Securitron Magnalock M670BD Series Installation Instructions Manual

2. INSTALL the three (3) 6-32 X 3/4" Phillips pan head screws to secure the lock chassis to
the mounting bracket using a Phillips screwdriver.

Performing the Final Wiring

NOTE 1: The end user and installer are liable for Fire and Building code compliance.
NOTE 2: A small screwdriver has been included to help make connections to the terminal
blocks, as required.
PULL wires/cables through the wire feed-through hole(s) that are drilled in the frame, and
1.
CONNECT wiring using the two diagrams below as a guide.
M670
M680
Page 18
PN# 500-10550
Rev. D, 12/14