Performing The Final Installation - Assa Abloy Securitron Magnalock M670BD Series Installation Instructions Manual

6. INSTALL the four (4) anchor screws using a Phillips screwdriver:
• Metal Frames use #12 X 1-1/2" Type A, Phillips Pan Head Screws
• Wood Frames use #14 X 3" Type A, Pan Head Screws

Performing the Final Installation

NOTE: The edge of the lock chassis must be flush with the end of the mounting bracket
when centered (see inset).
1. INSERT the top of the Magnalock chassis at the end of the mounting bracket, and SLIDE
the lock chassis to the center of the bracket.
Page 17
PN# 500-10550
Rev. D, 12/14