U)Sim Interfaces - Quectel EM12-G Hardware Design

LTE-A Module Series
EM12-G Hardware Design
Figure 11: Reference Circuit of RESET# by Using Button
The reset scenario is illustrated in the following figure.
IH
IL
Figure 12: Timing of Resetting Module
NOTE
Please ensure that there is no large capacitance on RESET# pin.

3.6. (U)SIM Interfaces

The (U)SIM interface circuitry meets ETSI and IMT-2000 requirements. Both 1.8V and 3.0V (U)SIM cards
are supported, and Dual SIM Single Standby* function is supported.
EM12-G_Hardware_Design 28 / 62