Packaging - Quectel EM12-G Hardware Design

LTE-A Module Series
EM12-G Hardware Design
four digits indicate the day, month and year when the module is manufactured. For instance, "18FD"
th
means 13 June, 2018. The next two digits indicate serial number of the manufacturing order. The last six
digits vary by module which could not be the same in certain time. Meanwhile, the SN and IMEI can be
checked by scanning the QR code.

7.6. Packaging

EM12-G modules are packaged in trays. The following figure shows the tray size.
Figure 33: Tray Size
Each tray contains 10 modules. The smallest package contains 100 modules. Tray packaging procedure
as below.
1. Use 10 trays to package 100 modules at a time (tray size: 247mm × 172mm).
2. Place an empty tray on the top of the 10-tray stack.
3. Fix the stack with masking tape in "#" shape as shown in the figure.
4. Pack the stack with conductive bag, and then fix the bag with masking tape.
5. Place the IMEI No. list into the small carton.
6. Seal the carton and then label the seal with sealing sticker (small carton size: 250mm × 175mm ×
128mm).
EM12-G_Hardware_Design 59 / 62