Table of Contents
Advertisement
PACMotion VFD Syllabus
GFK-3167B
9. Enter a Target Motor Speed to Run the Drive.
10. Press the button again to Reverse the Motor.
11. Stop the Motor when finished.
12. Disable the Real-Time Monitor when finished.
10.1.4
VFD Real-Time Edit and Drive Monitor Tool
To use the Scope and Data Logging Tool you must leave the Real-Time Edit mode.
1. Click Disable Real-Time Edit.
2. Click Tools-Scope/Data Logger
Figure 48: Scope/Data Logger
3. Choose the Channel 1 and 2 data similar to below and then Click the Start Button to
Capture Data.
(Fieldbus Speed Ref (Hz) and Master Speed Ref (Hz))
Figure 49: Fieldbus Speed
Bluetooth USB and Serial Cable (Note 7)
Section 10
December 2020
47
Advertisement
Table of Contents
