Emerson PENBERTHY GSA Installation, Operation And Maintenance Instructions
Emerson PENBERTHY GSA Installation, Operation And Maintenance Instructions

Emerson PENBERTHY GSA Installation, Operation And Maintenance Instructions

Anoloder for an-fo ammonium nitrate-fuel oil blasting

Advertisement

Quick Links

PENBERTHY MODEL GSA ANOLODER FOR AN-FO (AMMONIUM NITRATE - FUEL OIL) BLASTING
INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS
Before installation, these instructions must be read carefully and understood.

TABLE OF CONTENTS

Product warranty ................................................ 1
1
About the manual..................................... 2
2
Introduction ............................................. 2
2.1 System description ...................................... 2
2.2 Assembly ...................................................... 2
3
Available models ..................................... 2
operating temperature ranges ................... 2
4
Inspection ................................................ 3
5
Operation ................................................. 3
5.1 Testing .......................................................... 3
5.2 Filling and operating .................................... 3
6
Maintenance ............................................ 3
6.1 Cleaning ........................................................ 3
6.2 Troubleshooting ........................................... 4
7
Disposal at end of useful life ................... 4
8
Telephone assistance .............................. 4
9
Exploded parts diagram .......................... 5
Table 2 - Troubleshooting ................................ 4
Figure 1 - Installation ......................................... 5
Emerson.com/FinalControl

PRODUCT WARRANTY

Emerson warrants its Penberthy products
as designed and manufactured to be free
of defects in the material and workmanship
for a period of one year after the date of
installation or eighteen months after the date
of manufacture, whichever is earliest. Emerson
will, at its option, replace or repair any products
which fail during the warranty period due to
defective material or workmanship.
Prior to submitting any claim for warranty
service, the owner must submit proof of
purchase to Emerson and obtain written
authorization to return the product. Thereafter,
the product shall be returned to Emerson with
freight prepaid.
This warranty shall not apply if the product has
been disassembled, tampered with, repaired
or otherwise altered outside of the Emerson
factory or if it has been subject to misuse,
neglect or accident.
The responsibility of Emerson hereunder
is limited to repairing or replacing the
product at its expense. Emerson shall not be
liable for loss, damage or expenses related
directly or indirectly to the installation or use
of its products, or from any other cause or
for consequential damages. It is expressly
understood that Emerson is not responsible
for damage or injury caused to other products,
buildings, personnel or property, by reason of
the installation or use of its products.
This is Emerson's sole warranty and in lieu of
all other warranties, expressed or implied which
are hereby excluded, including in particular all
warranties of merchantability or fitness for a
particular purpose.
This document and the warranty contained
herein may not be modified and no other
warranty, expressed or implied, shall be made
by or on behalf of Emerson unless made in
writing and signed by the company's general
manager or director of engineering.
© 2018 Emerson. All Rights Reserved.
VCIOM-04067-EN 19/04

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PENBERTHY GSA and is the answer not in the manual?

Questions and answers

Summary of Contents for Emerson PENBERTHY GSA

  • Page 1 Table 2 - Troubleshooting ........ 4 Figure 1 - Installation ......... 5 This is Emerson's sole warranty and in lieu of all other warranties, expressed or implied which are hereby excluded, including in particular all warranties of merchantability or fitness for a particular purpose.
  • Page 2 Attach the control hose to the ejector body by screwing-in the male NPT connection on the Emerson does not have any control over the end of the air valve control assembly. Attach manner in which its anoloder is handled, the black loading hose to the outlet of the installed or used.
  • Page 3 PENBERTHY MODEL GSA ANOLODER FOR AN-FO (AMMONIUM NITRATE - FUEL OIL) BLASTING INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS 4 INSPECTION decreasing this distance to one foot may cause some of the AN-FO particles to be blown out of Safety instructions drill hole. On receipt of a Penberthy Model GSA anoloder, 6 MAINTENANCE check all components carefully for damage...
  • Page 4 Model GSA anoloder to the factory for intensive testing. You must obtain a Return Authorization (R.A.) number from Emerson before returning anything. Failure to do so will result in the unit being returned to you without being tested, freight collect.
  • Page 5 Responsibility for proper selection, use, and maintenance of any product remains solely with the purchaser and end user. Penberthy is a mark owned by one of the companies in the Emerson Automation Solutions business unit of Emerson Electric Co. Emerson Automation Solutions, Emerson and the Emerson logo are trademarks and service marks of Emerson Electric Co.

Table of Contents