Modbus/Tcp Ethernet Demo (Note 1) - Emerson PACMOTION VFD Application Note

PACMotion VFD Syllabus
GFK-3167B
Section 4: Modbus/TCP Ethernet Demo
(Note 1)
Figure 13: Modbus/TCP Ethernet Configuration
This Demo uses the CPE100 as the Initiating device for Modbus/TCP communications.
VFD Parameters
Parameter
QuickPanel Plus Ethernet Settings
VFD Modbus/TCP Option Module settings

Modbus/TCP Ethernet Demo (Note 1)

1. Set to the following VFD parameter values:
Value and Description
P1-12 4 (Fieldbus)
P1-14 201 (Extended Menu Access)
P5-05 0.0 (Disable communication loss timeout)
2. Set the following IP Address/Mask:
IP address = 192.168.1.7
Subnet mask = 255.255.255.0
3. Use a DHCP server or the HMS IPConfig software to set the IP address of the
Modbus/TCP module. Use the following settings:
IP address = 192.168.1.5
Subnet mask = 255.255.255.0
Section 4
December 2020
11