Table of Contents
Advertisement
PACMotion VFD Syllabus
GFK-3167B
Section 10:
(N
7)
OTE
10.1
Communications to the VFD
10.1.1
Bluetooth BLE Connection
You can use the internal (built in) or external (USB) type Bluetooth BLE ports for your PC.
1. On the VFD plug the Bluetooth BLE USB Stick (typical part number IC866-BLUE) into the
Serial port (not the RJ-45 LAN network port) and turn on power to the VFD.
After a few seconds you should see the green, red, and blue LEDs similar to the picture
below:
Figure 39: Bluetooth BLE USB Stick
2. Start the Emerson PACMotion VFD Studio program.
3. Go to Tools and Select Communications Device menu.
4. Select the connection type = BluetoothStick (BLE).
Bluetooth USB and Serial Cable (Note 7)
B
LUETOOTH
USB
S
AND
ERIAL
Section 10
December 2020
C
ABLE
42
Advertisement
Table of Contents
