ETC Unison Echo E-OCC-SR Installation Manual

Occupancy sensor

Advertisement

Quick Links

ETC Installation Guide
Unison Echo
Overview
The Echo Occupancy/Vacancy Sensor is a ceiling mounted sensor that utilizes
passive infrared (PIR) technology, providing reliable vacancy and occupancy
detection for lighting control. The sensor provides automatic configuration of
vacancy (auto-off) or occupancy (auto-on/off) functionality based on other
connected control stations. When manual control stations are present, the
sensor will only perform vacancy actions.
Each sensor is available in white or black finish. Lens masks are provided to
allow customized occupancy detection fields as required by each installation.
Custom Configuration
This document guides you through the installation and local configuration of
the Echo Occupancy/Vacancy Sensor. For more detailed information about
custom configuration options available for the Echo Occupancy/Vacancy
Sensor using EchoAccess, reference the EchoAccess Mobile App integrated
help system.
Note:
Corporate Headquarters
London, UK
Tel +44 (0)20 8896 1000
Rome, IT
Tel +39 (06) 32 111 683
Holzkirchen, DE
Tel +49 (80 24) 47 00-0
Hong Kong
Tel +852 2799 1220
Web:
www.etcconnect.com
Product information and specifications subject to change.
7186M2180
Rev C
Released 2016-02

Echo Occupancy/Vacancy Sensor
®
Occupancy Sensor
The Occupancy/Vacancy Sensor provides 360
degree coverage of the installed location and is
available in three models:
To use the configuration settings applied using EchoAccess, DIP switch
2 must be enabled. Reference
Middleton, Wisconsin, USA
Service: (UK)
Service: (UK)
service@etceurope.com

Service: (DE)

Service: (Asia)
service@etcasia.com

Copyright © 2016 ETC. All Rights Reserved.
Page 1 of 12
• E-OCC-SR- Occupancy/Vacancy Sensor with
small room lens covers 450 sq. ft. at
8 ft./ 800 sq. ft. at 10 ft.
• E-OCC - Occupancy/Vacancy Sensor with
standard room lens covers 1,800 sq. ft. at
8 ft./ 3,000 sq. ft. at 10 ft.
• E-OCC-HC - Occupancy/Vacancy Sensor
with high ceiling lens covers 300 sq. ft. at
10 ft./ 7,000 sq. ft. at 40 ft.
DIP Switch Settings
Tel +608 831 4116
Service: (Americas)
service@etceurope.com
techserv-hoki@etcconnect.com
ETC intends this document to be provided in its entirety.

on
page
7.
service@etcconnect.com
Electronic Theatre Controls, Inc.

Advertisement

Table of Contents
loading

Summary of Contents for ETC Unison Echo E-OCC-SR

  • Page 1   Web: www.etcconnect.com Copyright © 2016 ETC. All Rights Reserved.  Product information and specifications subject to change. ETC intends this document to be provided in its entirety.  7186M2180 Rev C Released 2016-02   Echo Occupancy/Vacancy Sensor Page 1 of 12 Electronic Theatre Controls, Inc.
  • Page 2: Wire Specification

    Leave approximately 10 inches (254mm) of wiring in the back box for connection to allow slack for future service needs. Note: ETC requires that all sensors be grounded. Pull an additional 14 AWG (1.5mm ) wire for grounding when control wires are not installed in grounded metal conduit.
  • Page 3: Parts And Supplies

    ETC Installation Guide Occupancy/Vacancy Sensor conditions, portions of the lens can be masked to block the sensor view Lens Masking page of these undesired areas. Reference Parts and Supplies The following parts and supplies are included with the Occupancy/Vacancy Sensor ordered: •...
  • Page 4: Junction Box Installation

    ETC Installation Guide Occupancy/Vacancy Sensor Junction Box Installation Step 1: Pull the Belden 8471 (or equivalent) and 14 AWG (2.5mm ) ground wire to the junction box. If you are installing the Step 2: sensor in series with other sensors or stations...
  • Page 5: Soft Ceiling Tile Installation

    ETC Installation Guide Occupancy/Vacancy Sensor Step 6: Attach the sensor to the mounting plate by aligning the tabs on the sensor with the slots on the mounting plate, then twist clockwise until the two are secured into place. Soft Ceiling Tile Installation...
  • Page 6: Sensor Configuration

    ETC Installation Guide Occupancy/Vacancy Sensor Step 4: Orient the smooth side of the mounting plate to the finished side of the ceiling tile and align and insert the soft ceiling tile adapter through the holes provided near the center of the mounting plate.
  • Page 7: Dip Switch Settings

    ETC Installation Guide Occupancy/Vacancy Sensor DIP Switch Settings DIP switches on the rear panel of the Occupancy/ Vacancy Sensor provide for additional configuration options including Use Custom Config, Vacancy Timeout, Enable/Disable PIR detection LED, and the ability to restore the sensor to its factory defaults.
  • Page 8: Power Up And Test

    ETC Installation Guide Occupancy/Vacancy Sensor Power Up and Test Power Up All EchoConnect terminations in the system must be made before applying power to the system and sensor. When the sensor is powered up, the PIR LED illuminates for one minute for calibration and warm-up, and then returns to normal operation.
  • Page 9: Vacancy Timeout

    ETC Installation Guide Occupancy/Vacancy Sensor MODE button MODE Walk Test Auxiliary button button rear panel view Press and hold the [MODE] button for 3 seconds to enter Step 1: “Program Mode.” Program Mode allows adjustment of the preset that activates for occupancy detection. By default, this is Preset 1.
  • Page 10: Lens Masking

    ETC Installation Guide Occupancy/Vacancy Sensor Grace Period The sensor features a 30 second grace period after a vacancy timeout occurs. During this grace period, if the sensor detects occupancy, it will turn on or restore the previous lighting condition. Auto Vacancy Timeout The “Auto”...
  • Page 11: Enable Walk Test Mode

    ETC Installation Guide Occupancy/Vacancy Sensor Test Occupancy/Vacancy Sensors offer a Walk Test mode which shortens the vacancy timer to 10 seconds, allowing for simple and quick verification of the sensors coverage and range in the installed space. Walk-Test mode automatically exits and the...
  • Page 12 ETC Installation Guide Occupancy/Vacancy Sensor Small Room side view 2.4m 10ft 3.0m 12ft 3.7m 20ft 20ft 15ft 10ft 10ft 15ft 6.1m 4.6m 3.0m 1.5m 1.5m 3.0m 4.6m 6.1m Large Room side view 2.4m 10ft 3.0m 12ft 3.7m 40ft 30ft 10ft...

This manual is also suitable for:

Unison echo e-occUnison echo e-occ-hc

Table of Contents