Advertisement
E T C I n s t a l l a t i o n G u i d e
®
Unison Aero
Overview
The Aero Power Sensor (UAPS) activates other Aero controllers based on the
connected circuit being powered. The UAPS also acts as a wireless signal
repeater.
The UAPS controls other Aero Controllers based on the presence of power.
When power is present, the UAPS sends a wireless signal to activate linked
controllers.
Corporate Headquarters
3031 Pleasant View Road, P.O. Box 620979, Middleton, Wisconsin 53562-0979 USA
London, UK
Unit 26-28, Victoria Industrial Estate, Victoria Road, London W3 6UU, UK
Rome, IT
Via Pieve Torina, 48, 00156 Rome, Italy
Holzkirchen, DE
Ohmstrasse 3, 83607 Holzkirchen, Germany
Hong Kong
Rm 1801, 18/F, Tower 1 Phase 1, Enterprise Square, 9 Sheung Yuet Road, Kowloon Bay, Kowloon, Hong Kong
Service: (Americas)
service@etcconnect.com
Web:
www.etcconnect.com
Copyright © 2014 ETC. All Rights Reserved. Product information and specifications subject to change.
7188M2115 Rev C Released 2014-09 ETC intends this document to be provided in its entirety.
Power Sensor
Tel +39 (06) 32 111 683
(UK)
service@etceurope.com
Tel +44 (0)20 8896 1000
Fax +44 (0)20 8752 8486
Tel +49 (80 24) 47 00-0
Fax +49 (80 24) 47 00-3 00
(DE)
techserv-hoki@etcconnect.com
Tel +608 831 4116
Fax +608 836 1736
Fax +44 (0)20 8896 2000
Tel +852 2799 1220
(Asia)
service@etcasia.com
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for ETC Unison Aero
Summary of Contents for ETC Unison Aero
- Page 1 Web: www.etcconnect.com Copyright © 2014 ETC. All Rights Reserved. Product information and specifications subject to change. 7188M2115 Rev C Released 2014-09 ETC intends this document to be provided in its entirety.
- Page 2 E T C I n s t a l l a t i o n G u i d e Power Sensor Placement and Radio Range The UAPS is intended for use with Aero wireless controllers. Consideration should be made for locating the controllers based on the construction materials and furniture that may disrupt transmissions.
- Page 3 E T C I n s t a l l a t i o n G u i d e Specialty Controls Series Installation The UAPS mounts inside an electrical junction box or panel at the electrical source. This UAPS can also be mounted directly behind an outlet or switch. W A R N I N G : Risk of electric shock! The UAPS utilizes high voltage and should only be installed by a qualified installer or...
- Page 4 Step 5: Replace the junction box face plate and hardware. Power Up and Test For detailed programming and configuration information, please reference the Unison Aero 902 MHz User Programming Guide. ETC documentation is available for free download at www.etcconnect.com. Contains FCC ID: SZV-TCM320U The enclosed device complies with Part 15 of the FCC Rules.
Need help?
Do you have a question about the Unison Aero and is the answer not in the manual?
Questions and answers