ETC Unison Heritage Installation Manual

E T C I n s t a l l a t i o n G u i d e
Unison Heritage Button Station
Overview
The Unison
communication bus. LinkConnect is based on Echelon
LinkPower bidirectional protocol, and uses one pair of wires (data+, data–).
LinkPower is topology free and polarity independent; you can install your
LinkPower data runs in any desired combination of bus, star, loop, and home-run.
ETC recommends using Belden 8471 (or approved equal) wire. The total
combined length of a LinkPower wire run may not exceed 1,640 feet (500m), with
a maximum distance of 1,312 feet (400m) between any two devices. The Heritage
Button Station may be installed into an industry standard single gang backbox
(provided by others) or a surface mounted backbox (sold separately and available
from ETC).
Heritage Button Station Surface Backbox
Model
-1S
-2S
All control wiring should be installed and terminated by a qualified installer and
should follow standard wiring installation practices. Leave approximately 10 inches
(254mm) of wiring in the backbox for connection and to allow slack for future
service needs.
N o t e :
Installing the Heritage Button Stat ion
Installation should follow local codes
and standard practices. The backbox
should be installed square for best
results. Ensure that the backbox is clean
and free of obstructions and that all
wiring is installed correctly.
Heritage stations ship with a termination
kit containing a LinkPower pigtail, a
ground wire pigtail, spacers, and all
required connectors for installation.
Corporate Headquarters 3031 Pleasant View Road, P.O. Box 620979, Middleton, Wisconsin 53562-0979 USA

London, UK Unit 26-28, Victoria Industrial Estate, Victoria Road, London W3 6UU, UK

Rome, IT Via Pieve Torina, 48, 00156 Rome, Italy

Holzkirchen, DE Ohmstrasse 3, 83607 Holzkirchen, Germany

Hong Kong Rm 1801, 18/F, Tower 1 Phase 1, Enterprise Square, 9 Sheung Yuet Road, Kowloon Bay, Kowloon, Hong Kong

Service: (Americas) service@etcconnect.com
Web: www.etcconnect.com Copyright © 2012 ETC. All Rights Reserved.  Product information and specifications subject to change.

7181M2100  Rev D  Released 2012-02  ETC intends this document to be provided in its entirety.
U n iso n H er i ta ge Bu t to n S ta t io n
®
Heritage Button Station connects to the LinkConnect station
Description
Unison 1Gang surface mount backbox
Unison 2Gang surface mount backbox
ETC requires that all stations be grounded by using grounded
metal conduit or a 14 AWG (2.5mm
Tel +39 (06) 32 111 683


(UK) service@etceurope.com

LinkPower
pigtail
Tel +44 (0)20 8896 1000

Fax +44 (0)20 8752 8486

Tel +49 (80 24) 47 00-0 Fax +49 (80 24) 47 00-3 00

(DE) techserv-hoki@etcconnect.com

P a ge 1 of 4
®
LonWorks™ with
2
) ESD drain wire.
Ground
pigtail
WAGO
Tel +608 831 4116
 
Fax +44 (0)20 8896 2000

Tel +852 2799 1220

(Asia) service@etcasia.com

Ele ct r on ic T he at r e C on tr o ls, I nc.
Spacers
Fax +608 836 1736