Reference Value - Omron S82J Series Manual

S82J
Item
Item
Other Ambient temperature
Ambient humidity
Dielectric strength Dielectric strength
Insulation resistance
Vibration resistance
Shock resistance
Terminal screw
tightening
Output indicator
Electromagnetic
interference (see note
2)
EMC
EMC standards
Approved
UL
standards
standards
CSA
VDE
Weight (see note 9)
Note: 1. DC inputs not included in safety standard approvals.
2. At 100% load for rated input voltage (100 VAC or 200 VAC).
3. The output specification is defined at the power supply output terminals.
4. For resetting, turn OFF the power supply, leave for more than three minutes, and then turn ON the power supply.
5. For resetting, turn OFF the power supply, leave for more than one minutes (90 seconds min. for the 300-W models and 3 minutes
min. for the 600-W models), and then turn ON the power supply.
6. To ensure the Emission Enclosure rating ferrite ring cores (recommended model: S82Y-JC-T) should be used on all cabling.
7. To ensure the Emission AC Mains rating for EN50081-1 (only for 200-VAC input), a noise filter (recommended models: S82Y-JF3-N
for 300-W, S82Y-JF6-N for 600-W) should be used on the input lines.
8. With UL508, 150-W connector type has "Recognized" approval.
9. The weight indicated is the weight of the open-frame type. (Includes the covers for 300-W and 600-W models)

Reference Value

Item
Reliability (MTBF) 135,000 hours min.
Life expectancy 10 yrs. min.
6
100 to 240 VAC input
10 W 25 W
Operating: See the derating curve in the Engineering Data section.
Storage: –25 to 65 C (with no condensation and icing)
Operating: 25% to 85%
Storage: 25% to 90%
3.0 kVAC, 50/60 Hz for 1 min (between all inputs and all outputs)
2.2 kVAC, 50/60 Hz for 1 min (between all inputs and all inputs/GR terminal)
1.0 kVAC, 50/60 Hz for 1 min (between all outputs and GR terminal)
100 MΩ min. (between all outputs and all inputs/GR terminals at 500 VDC)
10 to 55 Hz, 0.375-mm double amplitude for 2 h each in X, Y, and Z directions
2
300 m/s , 3 times each in X, Y, and Z directions
0.74 N S m
Yes (green)
Conforms to FCC Class A
Emission Enclosure: EN55011 class A
Emission AC Mains: EN55011 class A
Immunity ESD: EN61000-4-2: 4 kV contact discharge (level 2)
Immunity RF-interference: ENV50140: 10 Vm (80 MHz to 1 GHz) (level 3)
Immunity Conducted Disturbance: ENV50141: 10 V (0.5 to 80 MHz) (level 3)
Immunity Burst: EN61000-4-4: 2 kV power-line (level 3)
Conforms to EN50081-2 and EN50082-2
UL508 (Listing), 1950, Class 2 (per UL1310)
CSA C22.2 No. 14, No. 950, Class 2
EN50178 (VDE0160) and EN60950
Terminal types (only terminal part): VDE0106/P100
250 g 350 g 400 g max.
max. max.
Value
MTBF stands for Mean Time Between Failures, which is calculated according to the
probability of accidental device failures, and indicates reliability of devices. Therefore,
it does not necessarily represent a life of the product.
The life expectancy indicates average operating hours under the ambient temperature
of 40 C and a load rate of 50%. Normally this is determined by the life expectancy of
the built-in aluminum electrolytic capacitor.
100 or 200 VAC
automatically)
50 W 100 W 100 W (5,
(24 V) 12, 15 V)
1.08 N S m
8 kV air discharge (level 3)
2 kV output line (level 4)
UL508 (Listing), 1012, 1950 (see
note 8)
CSA C22.2 No. 14, No. 950
500 g 1,000 g max.
max.
Definition
100 or 200 VAC
(selected (selectable)
150 W 300 W
Conforms to
EN50081-2 and
EN50082-2 (see note 6)
With noise filter,
confirms to EN50081-1
(see note 6 and 7)
UL508/1012
CSA EB1402C
2,000 g 2,500 g
max. max.
S82J
600 W