Using The Application; Piece Counting - KERN FKB Operating Instructions Manual

Table scales

Hide thumbs Also See for FKB:

Table of Contents

11.2 Using the application

Before the balance can count parts, it must know the average part weight (i.e. refe-

rence). Proceed by putting on a certain number of the parts to be counted. The ba-

lance determines the total weight and divides it by the number of parts, the so-called

reference quantity. Counting is then carried out on the basis of the calculated

average piece weight.

• The higher the reference quantity the higher the counting exactness.

• Especially high reference must be selected for small parts or parts with

considerably different sizes.

• Smallest counting weight see table „Technical data".

1. Set reference

Reference quantity 5, 10, 20 or 50:



 If necessary, put on and tare the weighing container.

 Put on the desired quantity of reference pieces.

 Invoke menu setting < ref > and confirm by ➔ button.

 Use the navigation keys  to select the reference piece

quantity (5, 10, 20, 50) according to the placed reference

and confirm with the ➔ button.

 The balance will calculate the average item weight and

then displays the quantity of pieces.

 Remove reference weight. The balance is now in piece

counting mode counting all units on the weighing plate.

TFKB-B-BA-e-2311

Table of Contents

Tfkb-b