IDTECK Star 505R User Manual page 8

Function key:
The Star 505R has four Function keys ([F1], [F2], [F3], [F4]).
Card reading status LED:
When a card is read, the card reading status LED turns on green.
Backup Battery DIP Switch:
Star 505R has a switch for the backup battery connection, which remains open circuit to
prevent any current consumption of the backup battery.
6.2.2 WIRE COLOR TABLE OF THE Star 505R
SIGNAL
Main Power (+12V)
Power Ground (GND)
Door Relay Out (COM)
Door Relay Out (NC)
Door Relay Out (NO)
Alarm Relay Out (COM)
Alarm Relay Out (NC)
Alarm Relay Out (NO)
TTL Out 1
TTL Out 2
Exit Button In
Door Contact In
Aux In 1
Aux In 2
Wiegand Data 0 In
Wiegand Data 1 In
RS232 (TX)
RS232 (RX)
RS422 (TX+)
RS422 (TX-)
RS422 (RX+)
RS422 (RX-)
* Please cut out tail connector before installation.
COLOR
Red
Black
Gray with Red stripe
Blue with White stripe
White with Red stripe
White
Purple with White stripe
Purple
Orange with White stripe
Brown with White stripe
Orange
Yellow with Red stripe
Green
Green with White stripe
Pink
Cyan
Black with White stripe
Red with White stripe
Gray
Yellow
Brown
Blue
8