Step 4:
The next two Mounting Screws are located through two access holes in the
Mirror and Pulley Block. With a 7/64" Allen Key loosen (but do not remove) the second
two Mounting Screws.
Step 5:
Locate the Tensioner Screw in the left hand end of the Mirror and Pulley block. It
is inset into the left side. Using a 7/64" Allen Key, turn the screw Clockwise one (1) full
turn.
X Axis Belt Tensioning
Fusion
Revision Date: 9/30/2013
pg. 3 of 4