10-Hour Initial Engine Inspection For Yo-233-B2A Engines - Lycoming YO-233-B2A Maintenance Manual

2. 10-Hour Initial Engine Inspection
Complete this inspection after the first 10 hours of initial operation of the engine.
A.
Complete the 10-Hour Initial Engine Inspection Checklist for this inspection.
B.
WARNING
NOTICE: Copy the blank checklist and complete this checklist as a record of engine
maintenance. Put the completed checklist in the engine logbook.
Engine Model Number__________________
Date Inspection Done:________ Inspection done by:______________________________
Aircraft Tachometer:____________________
Inspection Item
Complete the operational
ground check in accordance
with Chapter 72-00.
05-20
Page 14
BEFORE ANY ENGINE INSPECTION OR SERVICE PROCEDURE,
MAKE SURE THE IGNITION SWITCH IS SET TO OFF AND THAT ALL
POWER TO THE ENGINE IS DISCONNECTED. ENSURE ALL
OBJECTS/PERSONNEL ARE CLEAR OF THE PROPELLER'S
ROTATIONAL ARC. IF POWER IS ON, A LOOSE OR BROKEN WIRE
CAN CAUSE THE ENGINE TO START AND THE PROPELLER TO
TURN WHICH CAN LEAD TO DEATH OR SERIOUS INJURY OR A
PROPELLER STRIKE.
10-Hour Initial Engine Inspection Checklist
Comments
Look for leaks. Identify
and correct the cause of
any leak. Correct any
problem and repair as
necessary to make sure the
engine operates correctly to
specifications.
YO-233-B2A Engine Maintenance Manual
TEO-540-A1A Engine Maintenance Manual
Engine Serial Number:______________
Engine Time:_______________________
Results/Notes
© 2021 Avco Corporation. All Rights Reserved
Done
February 2021