User's Manual
2.4.3 Installing MSATA
Step 1: The step here is the same as above chapter "2.5.2 Installing Mini PCIe Module -Step 1", For
details, please refer to the above chapter "2.5.2 Installing Mini PCIe Module -Step 1"
Step 2: Hold the MSATA module with its notch aligned with the MSATA socket of the mother board and
insert it at a 30 degrees angle into the socket (Note: Pay attention to avoiding the hard disk cable during
the installation process);
Step 3: Screw one screw to the holder as shown in the picture.
Step 4: Follow the reverse steps of disassembly to complete the product installation.
2.4.4 Installing M.2 Module
Step 1: The step here is the same as above chapter "2.5.2 Installing Mini PCIe Module -Step 1", For
39