Draper FOUNDATION Installation Manual page 14

Foundation
Section 5 - Hanging Horizontal Rails
Section 5.1 - For LED arrays up to 6 panels high - 2 Horizontal Rails
1. Using the top keyhole slots of the two outer wall mounting brackets,
hang the bottom horizontal rail on the pre-installed mounting hardware
.
(see Section 3, Step 5)
W A L L
2. Using the top keyhole slots of the outer wall mounting brackets,
hang the top horizontal rails on the pre-installed mounting hardware.
3. Secure the outer wall mounting brackets on each end of the horizontal
rails onto the wall. Leave the inner brackets loose for now.
W A L L
Inner Brackets
Leave loose for now.
for LED Panels
™
1
1
1
2
2
2
3
3
3
Secure Outer Bracket
on each side of each rail.
Fig. 5-1
Fig. 5-2
Fig. 5-3
page 14 of 32