Draper FlexShade Instructions Installation & Operation
  1. Manuals
  2. Brands
  3. Draper Manuals
  4. Projection Screen
  5. FlexShade
  6. Instructions installation & operation
Draper FlexShade Instructions Installation & Operation

Draper FlexShade Instructions Installation & Operation

Dual roller coupled
Hide thumbs Also See for FlexShade:
Table of Contents

Advertisement

Quick Links

Download this manual
Dual Roller Coupled
Motorized FlexShade

Overview - Components

FLEXSHADE FXMO
Locking
Ring
I d l e
r E n
E n d
d
c a p
Read and understand all warnings
Contents
Overview - Components .......................................................................................1
Section 1 - Mounting Brackets ...........................................................................3
Section 2 - Idler-End and Operator End Assemblies ......................................3
Section 3 - Pocket Headbox Installation ...........................................................4
®
(Extra Large Hardware)
CAUTION
(Page 2 of this document)
INSTALLATION & OPERATION
O p
e r a
t o r
E n d
E n d
c a p
PERSONNEL
REQUIRED
before beginning installation.
Section 4 - Pocket Headbox Dimensions ..........................................................5
..........................................................................................6
Section 6 - Fabric/Roller Assembly Alignment ................................................8
Section 7 - Limit Switch Adjustments ...............................................................9
Section 8 - Electrical Connections ............................................................... 9-11
Section 9 - Dimensions ......................................................................................12
If you have any difficulties installing or servicing your
Dual Roller Coupled FlexShades
Draper, Inc. | 411 S. Pearl St. Spiceland, IN 47385
draperinc.com | 765.987.7999 | 800.238.7999
|
FORM: Coupled_DR_FS_MO_XL_Hardware_Inst21
© 2021 All Rights Reserved
INSTRUCTIONS
TOOLS
REQUIRED
PENCIL
POWER DRILL
TAPE MEASURE
LEVEL
HARDWARE
MALLET
WORK GLOVES
RECOMMENDED
, call your dealer or Draper, Inc.
®
(by others)

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FlexShade and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Draper FlexShade

Summary of Contents for Draper FlexShade

  • Page 1: Table Of Contents

    If you have any difficulties installing or servicing your Dual Roller Coupled FlexShades , call your dealer or Draper, Inc. ® Draper, Inc. | 411 S. Pearl St. Spiceland, IN 47385 draperinc.com | 765.987.7999 | 800.238.7999 FORM: Coupled_DR_FS_MO_XL_Hardware_Inst21 © 2021 All Rights Reserved...

  • Page 2: Please Read - Important Safety And Installation Information

    In particular, electrical work 11. Do not wire motors in parallel without written permission from Draper, Inc. and wiring [indicated in diagram by dashed lines] must be completed only by a qualified professional electrician who has read this manual completely and is 12.

  • Page 3: Section 1 - Mounting Brackets

    Dual Roller Coupled Motorized FlexShade page 3 of 12 ® (Extra Large Hardware) Section 1 - Mounting Brackets Please Note: Installer is responsible for selecting OPERATOR IDLER mounting hardware appropriate for site conditions. 1. Mark wall, jamb, or ceiling for placement of RETAINER mounting brackets.

  • Page 4: Section 3 - Pocket Headbox Installation

    Dual Roller Coupled Motorized FlexShade page 4 of 12 ® (Extra Large Hardware) Section 3 - Pocket Headbox Installation Figure 3-A Please Note: Installer must provide adequate clearance for removal of Roller Assembly during installation and maintenance. Please Note: Headbox must be mounted directly to ceiling, or to a continuous blocking that is secured to building structure.

  • Page 5: Section 4 - Pocket Headbox Dimensions

    Dual Roller Coupled Motorized FlexShade page 5 of 12 ® (Extra Large Hardware) Section 4 - Pocket Headbox Dimensions Extra Large Dual Roller with Pocket Headbox " (221mm) CONTINUOUS BLOCKING BY OTHERS 7 " (197mm) CONTINUOUS BLOCKING " BY OTHERS (21mm) 3"...

  • Page 6: Section 5 - Mounting / Assembly

    "Operating the Retractable Coupler Shaft" section below. Caution: All motors should be tested and limits set using test cord before electrician wires shade. Please Note: Custom products/installations may not be reflected by this document. Call Draper , Inc. with any questions about ®...
  • Page 7 Dual Roller Coupled Motorized FlexShade page 7 of 12 ® (Extra Large Hardware) Section 5.4 - Intermediate Fabric/Roller Assembly (Fig. 8) Please Note: Skip this section if your unit only has two panels 1. If desired, the proper location of the next bracket can be verified. Otherwise, proceed to step 2.

  • Page 8: Section 6 - Fabric/Roller Assembly Alignment

    Dual Roller Coupled Motorized FlexShade page 8 of 12 ® (Extra Large Hardware) Section 6 - Fabric/Roller Assembly Alignment (Steps are shown for right-hand operators) Please note: If needed, the fabric panel heights can be adjusted so that the bottom edges of the fabric panels are aligned. On large units, this procedure should be done on only one panel at a time to minimize the amount of fabric weight that must be supported during the adjustment procedure.

  • Page 9: Section 7 - Limit Switch Adjustments

    All operating switches should be “off” before power is connected. Please Note: For low-voltage wiring requirements, Draper recommends consulting with a professional low-voltage electrical contractor. It is very important that shielded and stranded CAT 5 cable be used to prevent any electrical interference.
  • Page 10 Dual Roller Coupled Motorized FlexShade page 10 of 12 ® (Extra Large Hardware) Section 8 - Electrical Connections (Continued) Controls & System Overview Controls & System Overview M12 Connector for 4-Wire Motors Sonesse 120VAC Motors Sonesse RTS 120VAC Motors ®...
  • Page 11 Dual Roller Coupled Motorized FlexShade page 11 of 12 ® (Extra Large Hardware) Controls & System Overview 120VAC Motors AV Gateway Contact Closure Handheld Interface Remote Wireless Network Network Device Connector Device Connector Gateway Network Network Network Device Connector Device Connector...

  • Page 12: Section 9 - Dimensions

    (33mm) (33mm) (33mm) (33mm) (33mm) (21mm) (21mm) * This number may be greater, depending on motor selection. Contact Draper for motor verification. ® Extra Large Dual Roller Extra Large Dual Roller with Fascia Endcaps Only with Surface Mount Headbox 7 "...

Table of Contents