Sony LocationFree LF-X11 Operating Instructions Manual page 91

Problem
The on-screen remote control does not
work.
Remote Learning
Problem
Learning operation does not work.
The remote control does not work
properly after learning.
Others
Problem
TV and video pictures are distorted
when the Base Station is used as a
wireless LAN access point.
It takes awhile for the picture to appear.
• For questions about Internet connections, contact your Internet Service Provider (ISP).
• LocationFree TV FAQ pages
http://www.sony.com/locationfree/faq/
Causes and remedies
• Connect the IR Blaster to the IR BLASTER port on the Base Station
(1 page 13).
• Press some of the buttons on the device itself to make sure that it is
functioning normally. (Some devices cannot be operated, or can only be
partially operated, by the on-screen remote control.)
• Make sure the IR Blaster is installed so that it faces the infrared receiver
correctly (1 page 17).
• Move the device's infrared receiver away from any bright light, such as
a fluorescent light or direct sunlight.
• The on-screen remote control may not work properly when the
connection between the Monitor and Base Station is poor.
• Reprogram the on-screen remote control settings (1 page 67). (Some
devices cannot be operated, or can only be partially operated, by the
onscreen remote.) Make sure the remote control settings for [Video 1]
and [Video 2] are configured correctly in the [Remote Settings]
window.
• If the remote control does not work after using the learning function,
redo the learning operation.
Causes and remedies
• Before learning, check that the target remote control actually works
with the device you want to control
• Check that battery in the target remote control has enough power left.
• Learning operations can fail because of noise due to direct sunlight or
nearby fluorescent lights.
• Try redoing the learning operation a few times.
• If the learning fails no matter how many times you try, then the
LocationFree TV may simply be unable to learn the codes for that
remote control.
Causes and remedies
When a computer receives or sends data through wireless LAN while you
are watching TV or video on the Monitor, pictures on the Monitor or
audio may be distorted.
Transmission may take time due to a high level of traffic on the lines
connecting the Monitor and Base Station, or due to the location of the
Base Station and Monitor.
91