Connecting Other Devices - Sony LocationFree LF-X11 Operating Instructions Manual

Connecting Other
Devices
You can connect other devices featuring an A/V output terminal such as a VCR, AV receiver, DVR,
DVD player/ recorder to the Base Station.
Refer also to the operating instructions that came with the connected equipment.
or
Watching video on a connected
device
Select [Video 1] in the [Index] window. You can
operate the connected device using the on-screen
remote control on the Monitor (1 page 27).
z
Tip
To operate other devices from the Monitor, you must
connect the supplied IR Blaster. For details, see the
next page.
16
S-video and A/V cable
(not supplied)
If your VCR is not equipped with an
S-video jack, use a standard audio/
video cable (e.g., VMC-810S, not
supplied).
to the S-video and
A/V output jacks
:
Audio/video signal flow
Rear of Base Station
You can also connect to
the IN 2 terminal.
Note
If you have connected a DVD player to the Base
Station via a VCR, the VCR's copy guard function
may distort or dim the DVD picture. Connect the DVD
player directly to the video input terminal on the Base
Station.
Antenna cable
(not supplied)
to VHF/UHF
output jack