Sony LocationFree LF-X11 Operating Instructions Manual page 41

4
Select [Back].
If you selected [Public Wireless] in the
[Settings] window in step 1, you return to the
[Settings] window.
If you selected the [Settings] button next to
[On the Go-Wireless] in the [Monitor]
window in step 1, you return to the [On the
Go-Wireless] window. In this case, you
return to the [Settings] window if you select
[Back] twice.
5
Set up your wireless connection.
Make the settings described in "Connecting
via LAN (DHCP)" (1 page 83) or
"Connecting via LAN (assigning an IP
address manually)" (1 page 84), as
specified by your provider.
z
Tip
Most providers will instruct you to connect via
LAN (DHCP).
6
Select [Settings], and then select [Exit].
Connecting to an access point
1
Display the [Settings] window, and then
select [Public Wireless].
The [Connection Settings] window appears.
[Public Wireless] cannot be selected unless
the Monitor connection type is Wireless On
the Go mode. If the Monitor is in another
mode, select [Monitor] and [On the Go].
Then select [Settings] next to Wireless On
the Go mode, and select [Public Wireless].
2
Select the access point from the [Wireless
Network List], and then select [Connect].
[Connect]
The wireless network (SSID) and signal
quality appear under [Current Connection]
when you connect to an access point.
Notes
• On some access points, a
wireless network (SSID) may not appear, even
when it is accessible.
• If the message "Searching for (wireless
network)" displayed below "Current
Connection" does not disappear after a while,
reselect [Connect]. For a wireless access point
that already has authentication information
entered, check the [Security Settings].
• On the web page or mail, there is danger of
personal information being leaked or stolen, if
you connect to an unencrypted access point.
For details on wireless security, see "About
Wireless Security" (1 page 5).
3
Check your network connection.
Wait until an icon appears at the top of the
window to indicate that a network
connection has been successfully
established.
Select an access point.
mark beside the
41
Continued