Sony LocationFree LF-X11 Operating Instructions Manual page 42

Note
If the icon does not appear, or if the
does not stop blinking, then the security settings
may not be correct.
Check the access point settings to be sure that
they follow the instructions of the provider.
4
Display the index window and select [Web
Lite].
If the web page that you chose appears, then
the setup is completed. Some providers
automatically display an authentication
screen when you access their public wireless
access services. Follow the instructions on
the screen and enter your ID password. For
details, refer to the information of the public
wireless access service provider.
z
Tip
If you attempt to display a web page before
the icon appears (no flash), a message
appears warning that no Internet connection
is available. If this occurs, wait until the
icon stops flashing, and then select
[Home].
Note
Some providers charge for all time you are online
– from authentication to logout. For details, refer
to resources on the web site of the network
provider.
42
Network is not accessible.
Network connection
successful.
The icon flashes while
an IP address is being
acquired from a DHCP
server.
The signal level indicated by
the wireless icon may also be
level one or level two
depending on signal
strength.
icon
Connecting to a On the Go-
Wired LAN
Using a LAN cable (not supplied), you can
connect the Monitor to a wired LAN in a hotel or
other public facility, so that you can view web
pages and check your mail via the Internet.
Contact your service provider for details about
the information needed to connect to the network.
Some providers charge for all time you are online
– from authentication to logout. For details, refer
to the information of the network provider.
1
Display the [Settings] window, and then
select [Monitor].
The [Monitor] window appears.
2
Select [Settings] next to wired LAN On the
Go mode.
The [Wired Monitor Settings] window
appears.
3
Using a LAN cable (not supplied), connect
the Monitor to the Internet terminal at the
location where you are connecting.