Sony LocationFree LF-X11 Operating Instructions Manual page 90

Locationfree tv
Hide thumbs Also See for LocationFree LF-X11:
Table of Contents

Advertisement

Problem
Cannot get cable TV channels to appear.
Images from a connected device do not
appear.
Poor picture
Problem
Double images or ghosts
Snow or dim pictures
Stripes and noise
Other
Problem
Cannot control external TV tuner with
the on-screen remote control.
Video
Problem
No picture from the connected device.
90
Causes and remedies
• The unit supports cable TV channels 1 to 125. If you want to watch
other channels or the channel signal is scrambled, connect a cable box
to the video input terminal on the Base Station.
• After verifying whether [CABLE] is set to [ON], run automatic channel
scan again.
Causes and remedies
• Connect the antenna cable (not supplied) and CATV cable securely
(1 page 15).
• Adjust the position, orientation, and angle of the antenna.
• Check the antenna and/or cable connections.
• Make sure the channel selected is currently broadcasting.
• Make sure the antenna is not damaged or broken.
• Make sure the TV antenna is securely connected (1 page 15).
• Keep the antenna cable (not supplied) away from the power cord and
other connection cables.
Causes and remedies
• Some set-top boxes (STB) cannot be controlled with the on-screen
remote control when connected to the Base Station with an antenna
cable (not supplied). To control these devices with the on-screen remote
control, connect them to the Base Station with a video cable
(1 page 16). For more details, refer to the instruction manual for your
STB.
• Connect the IR Blaster to the IR BLASTER port on the Base Station
(1 page 13).
Causes and remedies
• Firmly attach the connection cables. Check that the connections to the
red, white, yellow, and S-Video jacks are correct (1 page 16).
• Non-interlace signals from computers or other equipment cannot be
displayed.
• Make sure the device is connected to the correct input terminal
(1 page 16).
• If the video of a VCR, DVD player, or other device connected to the
Base Station does not appear, check that the connected device is turned
on.

Advertisement

Table of Contents
loading

Table of Contents