Selecting A Secondary Audio Program (Sap) - Sony LocationFree LF-X11 Operating Instructions Manual

TV Monitor is too far, and
the top right of the screen.
• When Wide Range Mode is selected, signal
compression rate is increased, lowering picture
quality but increasing transmission distance.
• TV and video images take a short while to display
after turning on Wide Range Mode.
• Remote control commands for TV and video have a
slower response when Wide Range Mode is
selected.
• Wide Range Mode automatically turns off when the
Monitor is switched to the Web Lite, Mail or Album
functions. If you switch back to TV/Video, you must
select Wide Range Mode again.
• Settings cannot be changed when Wide Range Mode
is selected.
If you wish to change settings, first turn off Wide
Range Mode.
34
is displayed at
Selecting a
Secondary Audio
Program (SAP)
The secondary audio program (SAP) mode is
available for television broadcasts that include
multiple audio tracks.
When a TV program with multiple audio tracks is
tuned in, repeatedly select [SAP] at the bottom
left of the screen to switch among audio tracks.
[SAP] can be selected when a SAP (Secondary
Audio Program) signal is received.
Each time the [SAP] button is pressed,
[STEREO] or [SAP] appears in the bar on the
screen.
z
To select an SAP option for connected other device,
use the remote supplied with the connected equipment.
Tip