Turning On the
Power
Connecting the Power Cord to
the Base Station
Connect the power cord when you finish making
all other connections.
Base Station rear panel
AC-LX1B AC power
adapter (supplied).
Wall outlet
Connect the power cord to the Base
Station AC power adapter (AC-LX1B),
and the AC power adapter to the DC IN
jack on the Base Station, then plug the
power cord into a wall outlet.
Note
• Use only the supplied AC power adapter (AC-
LX1B).
• Do not bundle the Base Station AC power
adapter cord and the antenna cable (not supplied)
together. Doing so may interfere with your
television reception.
20
Ferrite core
Do not remove the
ferrite core.
To DC IN
Power cord (supplied)
Inserting the Battery
1
Place the Monitor on a soft cloth with the
LCD screen face down.
2
From the top of the compartment (1), slide
the battery in as far as it will go (2). Keep
the Monitor stand closed when inserting the
battery.
Notes
• Insert the battery so that the side with the
symbol faces upward.
• Insert the battery until you hear it click.
Symbol