Using Monitor On The Go - Sony LocationFree LF-X11 Operating Instructions Manual

Using Monitor On
the Go
You can use the Monitor away from home if you
connect it to a wireless or wired LAN.
You can connect to an access point of a public
wireless LAN or a wired LAN in, for instance, a
cafe or a hotel and then watch TV or a video,
browse the Web, or check your mail.
Searching For and
Connecting to an Access
Point
If you attempt to connect to a public wireless
access point at a cafe or an airport lobby with the
Monitor still in Home Wireless mode, a message
appears prompting you to switch the Monitor to
On the Go mode.
1
Turn on the Monitor.
An error message will appear.
2
Select [Home/On the Go] to switch to On the
Go mode.
The [Home/On the Go] window appears.
38
3
Select [On the Go], and then select [Back].
[Back]
4
Perform the corresponding operation
necessary for connecting to the network.
For example, to watch TV or a video, select
[TV], [Video 1], or [Video 2] from [Index].
To browse the Web, select [Web Lite] from
[Index].
An error message will appear.
5
Select [OK].
6
Select the wireless network to which you
want to connect and then select [Connect].
z
Tip
• If the icon appears beside the network,
[WEP] or [WPA-PSK with TKIP] needs to be
entered in the [Security Settings] in [Public
wireless]. About the [Security Settings], see
"Configuring a Wireless Network"
(1 page 40).
• You can also establish a connection if you
select a wireless access point from [Settings].