Learning Commands For On-Screen Remote - Sony LocationFree LF-X11 Operating Instructions Manual
Locationfree tv
Hide thumbs
Also See for LocationFree LF-X11:
- Quick start manual (2 pages) ,
- Specifications (2 pages) ,
- Settings manual (30 pages)
Table of Contents
Advertisement
Learning
Commands for On-
Screen Remote
If the buttons of the on-screen remote control do
not work in the same way as the buttons on an
actual remote control, you can have the on-screen
remote control “learn” the actual remote
commands.
You can also customize the on-screen remote
control from scratch, to emulate a remote control
that does not appear in the [Make] and [Type]
lists.
1
Select [Make] and [Type], and then, select
[Learning] in the [TV] window or the [Video
Input 1 (or 2)] window.
[Learning]
The learning window appears.
z
Tip
To customize the remote control from scratch,
select [Custom Remote] from the bottom of the
[Make] list and then select [Type] and [Learning].
2
Select a button to learn from the remote
panel shown in the window.
3
Point the remote control toward the infrared
receiver of the Monitor and press the button
you want the on-screen remote control to
learn.
IR receiver for Learning Remote
Notes
• Hold the remote control about 1 to 2 inches
away from the Monitor’s learning IR receiver.
• Keep the button of your component’s remote
control pressed until the learning message
disappears.
4
The message disappears when the command
has been learned, and a frame appears
around the button.
5
Repeat steps 2 to 4 to learn all necessary
buttons.
Page 69
Continued
Advertisement
Table of Contents
