Sony LocationFree LF-X11 Operating Instructions Manual page 79

5
Set the items in the window, and then select
[OK].
1 Enter the domain name or static IP
address of the Base Station.
2 Enter the port number of the Base Station
where you will be registering.
3 Select [OK].
You return to the [NetAV Settings] window.
z
Tip
If you are already using the NetAV function with
the supplied Base Station, change the domain
name and port number of the Base Station.
6
Select [Register to other Base Station].
The [Register to other Base Station] window
appears.
7
Set the items in the window, and then select
[Start].
1 Enter the registration password that you
acquired in step 4 of "Setting up the Base
Station for Registering LocationFree TV
Monitor" (1 page 77).
2 Enter a nickname for the Monitor, up to
20 alphanumeric characters in length.
The nickname you enter here will appear
in [Client Nickname] of the [Device
Registration] window.
3 Select [Start].
A confirmation message appears.
8
Select [OK].
The Monitor registration is successful if the
message "Registration completed." appears.
Note
If the message "Registration failed." appears,
check the Base Station domain name and port
number that you entered in step 5. If another error
message appears, follow the instructions to check
what went wrong.
9
Select [Back].
The [NetAV Settings] window appears.
10
Select [Settings], and then select [Exit].
Notes about using NetAV from
registered Monitors
• When you make a NetAV connection from a
registered LocationFree TV, you connect to the
Base Station whose domain name and port
number appear in the [NetAV Connection]
window under [NetAV Settings] in the Monitor
settings window. When the Monitor is
registered on multiple Base Stations and you
want to switch the Base Station to another one,
re-enter the domain name and port number of it.
• Registrations are cancelled by deleting them on
the Base Station (1 page 78). For this reason,
all registration information is lost when the
Base Station settings are initialized.
79