Netav Check; Using Netav - Sony LocationFree LF-X11 Operating Instructions Manual

NetAV Check

In [NetAV Check], you perform a test of your
NetAV connection via the Internet.
[NetAV Check] is displayed on a web page.
When the [NetAV Check] window appears,
follow the instructions in the window to check
that the NetAV settings are configured correctly.
Notes
• This check cannot be done in On the Go mode.
Always do it at home.
• Before starting, make sure that you can view web
pages with Web Lite.
• If the [NetAV Check] window does not appear,
check your Internet connection.
z
Tip
You can also proceed to [NetAV Check] from the
[Easy Setup] window, see "Displaying the [Easy
Setup] Window" (1 page 24).
46

Using NetAV

Note
The Base Station must be turned on to use the NetAV
function when you are away from home. If you want to
use the NetAV function, make sure that your Base
Station and router are turned on.
1
Connect to the Internet in On the Go.
See "Connecting to a On the Go-Wired
LAN" (1 page 42) for information about
connecting via a wired LAN.
See "Searching For and Connecting to an
Access Point" (1 page 38) for information
about connecting wirelessly.
2
Display a web page to confirm that the
Monitor's Internet connection is set up
correctly.
1 Press the [Index] button at the top of the
Monitor, and then select [Web Lite] from
the index window.
2 Check that the web page set as your home
page displays correctly.
3
Select [TV], [Video 1], or [Video 2] from the
[Index] window.
[NetAV]
The Monitor connects to NetAV
automatically.
If it does not connect to NetAV
automatically, select [NetAV] button.
The icon appears at the top right if
the Monitor successfully connects to your