Resetting Factory Defaults - Sony LocationFree LF-X11 Operating Instructions Manual

Resetting Factory
Defaults
When you want to reset all of the settings to the
factory defaults, initialize both the Base Station
and the Monitor. Once you initialize, all saved
data is lost. When you initialize the Internet and
Wireless connection settings, you also need to
initialize the Base Station.
Notes
• Check that the Base Station is turned on. Bring the
Monitor close to the Base Station.
• Be sure to initialize the LocationFree TV with the
AC power adapter attached and the battery inserted.
• The Monitor restarts during the initialization
process. This is not a malfunction.
Initializing the Base Station
You must initialize the Base Station when you
carry out "Resetting All Settings" and
"Initializing Internet Connection/Wireless
Connection".
By initializing the Base Station, you delete all of
Internet, wireless, and NetAV settings.
1
Turn off the Base Station.
2
While pressing BASE STATION RESET on
the rear of the Base Station, turn on the
POWER.
Keep pressing the BASE STATION RESET
button until the NETAV LED on the front of
the Base Station turns red.
Rear of
Base Station
BASE STATION
RESET button
Resetting All Settings
To reset all settings, you need to initialize the
Base Station first, then initialize the Monitor.
Note
Be sure to follow the instructions for "Initializing the
Base Station" before initializing the Monitor.
1
Initialize the Base Station (see left).
2
Open the [Settings] window and select
[Other].
The [Other] window appears.
3
Select [Initialize].
The [Initialize] window appears.
4
Select [Clear All].
The [Clear All] window appears.
5
Carefully read the precautions shown on the
screen, and select [OK].
All settings are reset, the Monitor restarts
automatically, and the Welcome window
(1 page 21) appears.
Front of
Base Station
NETAV LED
81