Takara Belmont RS III Operating Manual page 23

■ Water Catcher
The product is provided with a water catcher to prevent water
leaks from the neck area trickling onto the cover or the floor
when shampooing.
The amount of water that can accumulate in the
water catcher is limited. Be sure to wipe off the
Caution
water or clean the catcher to prevent
contamination after finishing shampooing.
■ Synthetic Leather Parts
Clean the leather every day after work. Leaving dirt uncleaned may cause mold to grow.
Wipe with a soft, dry cloth or a damp cloth. If the leather is extremely dirty, wipe with a 10% detergent solution diluted
using water, followed by a damp cloth, then wipe dry.
If leather is stained by clothes or belts, it should be wiped clean as quickly as possible with a 10% detergent solution
diluted using water to avoid further staining by the plasticizing agent.
Take care to remove all water after wiping with a damp cloth. Any water that remains may encourage hydrolysis.
Do not use solvents or bleach.
Do not use leather cleaner containing solvents or scourers. The surface may degrade, leading to changes in the
texture and luster. If leather cleaners are to be used, first check that there is no discolouration by testing in an area
that is not visible.
Do not use the following items.Volatile chemicals such as thinners, alcohol, benzene, nail polish
Caution
Do not use brushes or scouring pads.Do not use brushes or scouring pads when cleaning the
■ Cover
Wipe clean with a soft, dry cloth. If they are extremely dirty, wipe with detergent diluted with water, and
always wipe them dry.
Never use volatile chemicals such as thinners, alcohol, nail polish remover, gasoline or kerosene,
cleaning products such as wax with a scourer, a sponge with a scourer, detergents that include
Caution
organic solvents, acidic, alkaline or chlorine-based detergents, or scouring pads. Failure to follow
this instruction may cause scratches or discolouration.
■ Cleaning the shower head (Air Bubble Area)
<Low-splash Shower Head>
1
The air bubble area of the shower head should be cleaned
once a month (as a general guide). Apply the supplied
wrench to the chamfered portion of the air bubble fixture.
Be careful not to pinch your hand or finger in
Caution
the wrench.
remover, gasoline or kerosene, wax with a scourer, or a sponge with a scourer.
leather. Failure to follow this instruction may cause scratches, and dirt may not be able to be
removed.
Shower head
23
Water Catcher
Air Bubble Fixture
Wrench