Takara Belmont RS III Operating Manual page 19

■Adjusting the volume of water, and adjusting the water temperature
1
Push the knob to forward direction and adjust the volume of
water according to an angle of the knob.
Knob
Faucet
A gushing sound may be emitted from the main body depending on the environment or conditions
that it is used in. This sound is due to water flowing fast through pipes as a result of high water
Note
pressure or water volume control, and is not indicative of a defective product. This gushing sound can
be reduced by adjusting the water pressure.
Caution
Turn the tap in the H or C direction to set the
temperature to an appropriate level.
Caution
The water flow may change significantly when controlling the hot water temperature
depending on the operating environment or conditions. This phenomena occurs when the hot
Note water temperature exceeds the recommended values (60℃ to 80℃), there is significant difference
in the water supply or hot-water supply pressure, or multiple devices are used at the same time-it
is not equipment failure.
Push
When the basin is not being used, make sure to turn the water off properly.
Failure to do this may cause water leakage.
When the basin is not being used, do not cover the drain with the drain cap, towel or shampoo
cloth as water may come out. Water may be accidentally trickled due to an increase in water
pressure at night. This may cause water to spill from the basin, leading to water leakage.
Return the handle to an appropriate position after use.
Using other equipment that share the same water / hot water supply source at the same time
may cause unstable water temperature.
Tap
(H) Hot
19
(AY-P073X,AY-074X)
(C) Cold