Periodic Maintenance And Checks - RCm R. 703 E SACK/1 Instruction And Maintenance Handbook

70
1) The motor-sweeper must be inspected by a specialist technician who checks its safety or for any damage or defects in the
following cases:
• before it is put into operation
• after modifications or repairs
• at regular intervals, as indicated in the "Routine maintenance and control operations" table.
2) Every six months check that the safety devices are in good working order; the inspection must be made by authorized
specialist staff.
3) To ensure the sweeper performance, the machine must be overhauled by RCM staff every 5 years.
4) The person in charge of the machine must make an annual check on its condition. During this check, he must decide whether
the motor-sweeper still complies with the current safety regulations, and then apply a marker plate to the machine to
indicate that the check has been made.

Periodic maintenance and checks

1 Check level of water in batteries
2 Check carbon brushes of suction fan and drive motors
Check that the main brush is not entangled with string,
3
wire, etc.
4 Check filter cartridges
5 Replace filter cartridges
6 Check main brush trace
7 Check tension of the belts
8 Grease steering chain
R 703 E SACK/1 R 703 E SACK/1
R 703 E SACK/1 R 703 E SACK/1 R 703 E SACK/1
MOTOSCOPE INDUSTRIALI
Periodic maintenance and checks
Every ... hours
8 40 125 500
•
•
•
•
•
•
•
1500
•