Oce fx2081 User Manual page 57

4
Click [Add] in the "Edit Custom" dialog box.
5
Enter a "Name" if necessary.
Up to 20 characters can be registered.
6
Enter "Width" and "Height".
• Both width and height can be entered every 0.01 inch (or 0.1 mm)
within a range between 3.94 and 11.69 inches (or 100.0 and 297.0 mm)
for width and between 5.51 and 17 inches (or 140.0 and 432.0 mm) for
height.
• If printing on both sides, set width within a range between 5.5 and
11.7 inches (140.0 and 297.0 mm) for width and 7.2 and 17.0 inches
(182.0 and 432.0 mm) for height.
• The width value should not be larger than height value, and the height
value should not be smaller than width value, even though each setting
value is within a fixed range.
7
Click [Add] to register.
8
To register another size, repeat steps 5 to 7.
9
Click [OK].
3-22