ABB Relion 670 Series Commissioning Manual page 57

1MRK 504 165-UUS Rev. J
IEC13000060 V1 EN-US
Figure 6:
5. Select Use the following IP address and define IP address and Subnet mask if the front port is
used and if the IP address is not set to be obtained automatically by the IED,see
address must be different from the IP address chosen for the IED.
IEC13000062 V1 EN-US
Figure 7:
6. Use the ping command to verify connectivity with the IED.
7. Close all open windows and start PCM600.
Transformer protection RET670
Commissioning manual
IEC13000060-1-en.vsd
Select the TCP/IPv4 protocol and open Properties
IEC13000062-1-en.vsd
Select: Use the following IP address
© 2017 - 2021 Hitachi Power Grids. All rights reserved
Section 4
Starting up
Figure 7. The IP
51