Advertisement
© Elcom Ltd.
Note: The communication with payment terminal is enabled by setting the 5. System flag, digit 5 to
value 1.
Note: If the cash register not communicate with the EFT terminal and everything is connected and set good,
you need change EPROM, which contains software with a new EFT terminal communication protocol.
The software also remains an old communication protocol. Contact your dealer for the information on the
EFT terminal connection.
4.7 Stock out
I
Euro-2000TE Alpha
TERMINATE PAYMENT BY
CRED.CARD Y}CR|{N}X|
ENTER CREDIT CARD No
V
STOCK OUT
#
Registration mode
R
Advertisement
