Notes, Warnings, and Cautions
The following labels identify information that is especially important to note:
Note:
Provides you with information that is important to successfully setup and use the XW Transmitter.
Caution or Warning:
Caution, Warning, or Important:
refer to accompanying documents.
Tip:
Provides helpful hints.
Safety and EMC Considerations
ESD Warning:
Warning:
The following parts of the unit are ESD (Electro-Static Discharge) sensitive:
•
Antenna
•
Metal Connectors for signal and power
•
Metal body of sensor probes
EMC (Electromagnetic Compatibility Considerations):
•
Whenever EMC is an issue, always use shielded cables.
•
Never run signal and power wires in the same conduit.
•
Use twisted-pair wires for differential signal connections.
•
Install Ferrite Bead(s) on a signal wire close to the instrument if EMC problems persist.
•
Failure to follow all instructions and warnings may result in injury.
Tells you about the risk of electrical shock.
Tells you of circumstances that can affect the instruments functionality and must
5 |
P a g e