Customize Device Settings; Sensor Setting; Xw Transmitter Network Setting; System Functions - Omega XW-ED User Manual

Customize Device Settings

To customize the device settings of your transmitter, click the Device Settings Configuration Tab.

Sensor Setting

Transmission Interval must be set by the ZW-REC and controls the
frequency that readings are sent from the transmitter to the
receiver.

XW Transmitter Network Setting

This section allows you to change the PAN ID/Network ID and
the Device ID of the XW Transmitter separate from the Add
Device Wizard.

System Functions

Reset User Hours: Resets the operation hours of the XW
•
Transmitter as displayed in SYNC.
• Update Current Time: Changes the XW Transmitter's internal
clock to sync with the clock of the computer it is connected to.
Important: Click Update Current Time when setting up the
XW Transmitter for the first time to ensure accurate date
and time are reflected in the data logging.
• Factory Reset: Resets the XW Transmitter to its factory settings.
• Load Configuration: Allows the user to load a configuration file (.json) from the computer the XW Transmitter is
connected to.
Save Configuration: Saves the current configuration set for the XW Transmitter into a .hex file.
•
• Reset ID: Allows the user to reset the Network ID and the Device ID of the XW Transmitter through the XW Transmitter
Onboarding Wizard.
• Firmware Update: Allows the user to load a firmware update file (.hex) from the computer the XW Transmitter is
connected to.
• Rename Device: Allows the user to change the name of the XW Transmitter.
Figure 19
13 | P a g e