2.5
LED
2.6
Quick Start Guide
2.6.1
Debug Port Connection And Setting
1. RSB-3720 Debug port is shared with COM1, please connect debug console
cable 1700100250 & 1700019474 together and connect to your USB-to-RS232
Cable to your PC terminal, connect the cable to COM1 pin header nearby the
HDMI connector.
2. RSB-3720 can communicate with a host server by using serial cables. Common
serial communication programs such as HyperTerminal, Tera Term or PuTTY can
be used in this case. The example as the below describes the serial terminal
setup using Tera Term on a Windows host: Open Tera Term on your Windows
PC, and select the settings as shown in Figure 2.3.
RSB-3720 User Manual
Note: Debug cable needs to be purchased separately.
Figure 2.3
35