1.8.2
EDP Panel / LVDS Panel Voltage Selection (JEDP1_LVDS1)
The AIMB-219 motherboard contains a jumper that can erase CMOS data and reset
the system BIOS information. Normally this jumper should be set with pins 1-2
closed. If you want to reset the CMOS data, set CMOS1 to 2-3 closed for just a few
seconds, and then move the jumper back to 1-2 closed. This procedure will reset the
CMOS to its default setting.
Table 1.5: JEDP1_LVDS1
Function
Jumper position for 5V
Jumper position for 3.3V (default)
Jumper position for 12V
1.8.3
PWRBTN#/RESET#/HDD LED / Internal Buzzer / External
Speaker Header (JFP1)
Table 1.6: JFP1
Function
Internal buzzer (default)
Jumper Setting
Jumper Setting
9
AIMB-219 User Manual