7. Connect the ISO tank fill plug on the Hawkeye ECU harness (P/N 115-7303-143) to the tank fill receptacle on the
machine cable harness (if applicable).
FIGURE 10. ISO Tank Fill
ISO Tank
Fill
8. Connect the four-pin high current and switched power plug on the Hawkeye ECU harness (P/N 115-7303-143)
to the receptacle on the machine cable harness.
FIGURE 11. High Current and Switched Power Connection
High
Current
and
Switched
Power
RCM - Sprayer Mounting and Connection: Install the RCM - Sprayer Cables and System Power Cables
RCM - SPRAYER MOUNTING AND CONNECTION
37