Raven Hawkeye 2 Installation Manual page 34

For et apache sprayers my 2017+

Hide thumbs Also See for Hawkeye 2:

Table of Contents

CHAPTER 4

7. Be sure the corrosion inhibitor has coated the connector electrical contacts and recessed portions of the

connector.

NOTE:

To determine if corrosion inhibitor has been applied, inspect for a thick liquid in the bottom of the

connector.

8. Once all boom cables are routed along the boom as desired, begin connecting the boom cables to the

Hawkeye® 2 NCVs previously installed.

9. Use provided cable ties to secure the boom cables to the boom components as needed to ensure they are

secure.

NOTE:

Do not put strain on cables and connections while applying tie-downs.

Do not leave any exposed cable loops that may get caught on crops or other debris while the vehicle

is in use.

10. The inner boom cables will be connected to the LEFT/RIGHT chassis cable in a later section.

Hawkeye® 2 Installation Manual for ET Apache Sprayers MY 2017+

Table of Contents