Table of Contents
Advertisement
WARNING: RISK OF ELECTRIC SHOCK
Do not remove the cover or attempt to open the enclosure. No user serviceable parts insid
qualified service personnel.
WARNING: RISK OF ELECTRIC SHOCK
•
Do not touch live electrical parts.
•
Incorrect connections may cause electric shock.
•
Do not Disconnect Under Load.
WARNING: This equipment is intended only for charging vehicles that do not
require ventilation during charging. Please refer to your vehicle's owner's manual
to determine ventilation requirements.
WARNING: Do not use extender cables to increase the length of the charging cable.
Maximum length is limited to 25 feet by the National Fire Protection Agency.
WARNING: Do not drag the charge point by input power cord.
CAUTION: Do not expose to liquid, vapor or rain.
CAUTION: If this unit is installed outdoors, the outlet must be rated for outdoor
installation. The outlet must be installed properly to maintain the proper NEMA
rating of the enclosure.
•
Installation work and electrical wiring must be done by qualified person(s) in
accordance with all applicable codes and standards, including fire-rated
construction.
•
Do not touch the terminals or other current-carrying parts.
•
Take care not to drill into any pipes or power lines beneath the surface during
mounting holes preparation. Use power line / metal detector.
•
Do not trample or drive over the product's cables.
•
Do not put any foreign objects into the enclosure.
•
Do not start the engine when the charging connector is still connected.
CAUTION: Do not use this product if there is any damage to the unit. Send the unit
back to the manufacturer in the event the unit is not operational.
SAVE THESE INSTRUCTIONS
Basic/Smart/Intelligent Charger-32A Installation Manual Rev. 4.0
IV
BlinkCharging.com • (888) 998.2546
©2021 Blink Charging Co. • NASDAQ: BLNK
Advertisement
Table of Contents
Need help?
Do you have a question about the Basic Charger-32A and is the answer not in the manual?