Table of Contents
Advertisement
2.6 Install the Holster
1. Separate the holster from hook.
2. Fasten the hook on the wall with appropriate screws.
2-1. For finished walls supported by wood studs, use #12 tapping screws (x2).
2-2. The recommend torque is 25 kgf.cm (21.7 lb-in).
15
Basic/Smart/Intelligent Charger-32A Installation Manual Rev. 4.0
BlinkCharging.com • (888) 998.2546
©2021 Blink Charging Co. • NASDAQ: BLNK
Figure 2-14 Separate the holster
Figure 2-15 Secure the hook
Advertisement
Table of Contents
Need help?
Do you have a question about the Basic Charger-32A and is the answer not in the manual?