Blink Basic Charger-32A Installation Manual page 2

Table of Contents

Advertisement

IMPORTANT SAFETY INSTRUCTIONS
This document contains instructions and warnings that must be followed when installing and
using the Electric Vehicle Supply Equipment (EVSE). Before installing or using the EVSE, read this
entire document as well as WARNING and CAUTION markings in this document.
Safety Instructions
The symbols used have the following meaning:
WARNING: RISK OF PERSONAL INJURY
WARNING: RISK OF ELECTRIC SHOCK
WARNING: RISK OF FIRE
CAUTION: RISK OF DAMAGE TO THE EQUIPMENT
The charge point must be installed only by licensed electricians.
Make sure that the materials used and the installation procedures follow local building
codes and safety standards.
The information provided in this manual in no way exempts the user of responsibility to
follow all applicable codes or safety standards.
This document provides instructions for the charge point and should not be used for any
other product. Before installation or use of this product, review this manual carefully and
consult with a licensed contractor, licensed electrician, or trained installation expert to make
sure of compliance with local building codes and safety standards.
I
Basic/Smart/Intelligent Charger-32A Installation Manual Rev. 4.0
BlinkCharging.com • (888) 998.2546
©2021 Blink Charging Co. • NASDAQ: BLNK

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Basic Charger-32A and is the answer not in the manual?

Subscribe to Our Youtube Channel

This manual is also suitable for:

Smart charger-32aIntelligent charger-32a

Table of Contents