Specifications - Kogan KAGFLWAS10A User Manual

Important:
If the machine is exposed to temperatures below 0°C, certain precautions should be taken.
1. Turn off the water tap.
2. Unscrew the inlet hose.
3. Unhook the drain hose from the rear support and position the end of this hose and
that of the inlet hose in a bowl. Run the spin program.
4. Disconnect the appliance from power.
5. Screw the inlet hose and reposition the drain hose.
6. When you intend to start the machine up again, make sure that the room
temperature is above 0°C.

SPECIFICATIONS

Parameter
Power
Washing / spin capacity
Rated power
Water pressure
Power of off-mode
Power of left-on mode
Program time (min)
Remaining moisture content
Average Energy consumption
Average Water consumption
Net weight / gross weight
Outer dimension (W x D x H) mm
Note:
The above data is based on choosing the program "Cotton
temperature to "60°C", and selecting the spin speed to "1400rpm".
Data can vary from the nominal values given depending on water pressure, water hardness,
water inlet temperature, room temperature, type and volume of load, fluctuations in the
electricity supply and any extra options selected.
Value
220V-240V—,50Hz
10.0kg
2000W
0.02-0.8MPa
0.38W
0.38W
304
Class B
1.05kWh
54.5L
69kg/74kg
595 x 665 x 845
", setting the washing