Kogan KAGFLWAS10A User Manual page 17

Control panel display
Digital display: This area will show the remaining time, delay hour and temperature.
Inlet timeout: This icon will be displayed when the water inlet sensor times out.
Please check the water tap and make sure it is open.
Delay: This icon will display when a delay timer has been set.
Foam reducing: If there is too much foam during the wash, the machine will run a
program to reduce the foam by itself and this icon will display.
Balance control: The machine has a balance control device to check and make
sure that the clothes have been evenly distributed into the drum before the spin. If
the balance control fails more than three times, this icon will be displayed and the
spin will be delayed.
Child lock: This icon will display once the child lock function is selected.
Door lock: This icon will display when the door lock is active.
1400-
Spin speed: Displays the speed of the spin cycle.
600
High water level: If the machine is paused during a wash cycle, but the door can't
be opened due to the high-water level, this icon will display.
Weighing: The machine will weigh the clothes at the beginning of some programs.
This icon will display until the weighing process is complete.
Main wash: The icon will display in standby mode when this function is selected.
This icon will flash during operation and will display when the machine is paused,
the logo will be turn off when machine finishes washing.
Rinse: The icon will display in standby mode when this function is selected. This
icon will flash during operation and will display when the machine is paused, the
logo will be turn off when machine finishes washing.
Final spin: The icon will display in standby mode when this function is selected. This
icon will flash during operation and will display when the machine is paused, the
logo will be turn off when machine finishes washing.
Water hot: If paused during a washing cycle, but the door can't be opened due to
the high water temperature
"Start/Pause" is pressed to start the machine again.
Drum clean: If this icon is displayed, please run the "Drum Clean" program to clean
the drum.
Pump clean: If this icon is displayed, please check if the drain pump is still working.
(≥ 60°C), this icon will displayed until the button